"Because I was inverted..."
It is a line most of us know, and can remember clearly. Much like the scene in the movie, this bumper is inverted from our F4 Phantom HC rear bumper, with a straight lower tube, and an upper protective tube under the tail lamp, that follows the 3rd gen bedside body line. (no body line on the 2nd gen trucks, however the tube will follow same dimensions. )
- 1.75 .120 HREW or DOM.
- Available in open tube, flat filler, or dimpled filler panels.
- New HD brackets are 3/8" thick, tying into all tube components.
- Built in recovery/shackle point. Just like our Osprey front, we minimized the impact of your shackle mount, all while letting you pull directly on the bracket to the frame.
-HD receiver mount. We heard you loud and clear, you wanted a more prominent hitch option. The new setup not only ties into the 3 main tubes, but also has .250 wall box supports that tie directly into the frame mounts. Meets class 3 hitch requirements and will take anything the Tacoma is rated for (you will need a decent drop hitch as the receiver moves up substantially from stock location.
-Machined tube end caps. Wheel well side tube ends will be finished with machined domed tube caps, creating a nice clean look.
- As always, brackets are laser cut and materials are all made in the USA.
- These items will ship freight, requiring a commercial address or pickup at the nearest terminal. Residential delivery is available, but there is a substantial upcharge from the courier. Please select "Freight base" shipping option - $250 flat rate in lower 48. Additional freight items will add to freight charge, please see our shipping information page for more information.
- Please allow roughly 2 month lead time for the product before shipping information is provided. Depending on your location, and the courier used, specific shipping days may be used. This item will ship bare (may be shipped in a black base coat. This coat is not intended to be a final finish, it is purely to prevent oxidation in transit.)