Osprey Modular Hybrid Front

  • Sale
  • Regular price $980.00


The Pre-Sale is OPEN
(this item is currently only offered for the 3rd gen)
The OSPREY:
Hybrid bumpers are super hot right now.  Everyone wants one, and everyone is making them - and they are making them the exact same way.  Big goofy shackle mounts.  Winch lines pointed down to the ground.  Exposed fairleads.  The list goes on. So, as per usual, we wanted to throw our little spin on it.  Just like its' namesake, we wanted the hybrid to be adaptable to all scenarios.

Lets start with the basics:
-Winch tray is 8" x 29.5" max size.  Height of winch will determine need to trim lower -grill support or not.   
-3/16 steel mainframe
-1/4 steel winch tray
-3/16 winch tray supports
-3/8 shackle mount w/ 1.5" .250 wall through tube
-1.75 .120 tube wings.  Spiked and domed tips. (no cost variance here, just let us know if you want the front to be spiked or a rounded cap.  Tube end at wheel well is round dome always)
-Coming later - 3/16 plate wings
-Lower mount brace through bolt.


What sets it apart:
-Modular.  The wings are removable, replaceable. and interchangeable.  Want all plate? - fine, bolt up the plate wings (coming soon, likely a month after initial release).  Want hybrid? - bolt up the tube.  Need a replacement wing?  Just order the cheaper replacement part.  Being modular also allows this to ship regular ground, no need to worry about commercial address or freight.

-Recessed shackle mount.  Clearance is everything.  Instead of sticking it way out there, we pulled the shackle mount back into the dead space on the bumper.  the 3/8" piece is tied directly to the 3/16 side plate with a .250 tube guide for the bolt/pin, as well as to the winch tray, and the bumper mount, right where the bumper attaches to the frame horn.  Tying to to all the different pieces helps spread the load, while pulling closer to the mount, instead of leveraged way out in front of bumper.

-Custom Lettering.  Yep, you read that right.  Want your rig name, "Taco", or something else cut into the front of your bumper, we can do that.  (no profanity, copy-write, or trademark) The font will be what is shown in photos and will have a 12 character limit.  Please email us prior to selecting so we can approve the option. If you select plain, this will come with the flat front panel, we can cut our logo at no additional cost, just let us know.+$150.00

-Light mount options.  Yes, we heard you on the tube bumpers, and are offering a few options for light mounts.  We can do the slots on the top deck for lighting options, as well as slotted brackets on the tube wings for light options as well.  You will be able to dial in the look and lights you are looking for.  +$30

-Winch protection/access. Most bumpers leave the winch super exposed.  Depending on the style of bumper, that is inevitable.  However, on a plated center, it makes no sense to not protect the winch and line from the elements as much as possible.  Winch lever and control box access are done from the sides.  Preventing any large voids in the front that would allow grime and debris to get to the parts that matter.  

 POWDERCOAT is now available for these.  

PLEASE SELECT BUMPERS/SLIDERS FOR SHIPPING - $200 flat rate to lower 48

 Please allow a 3-4 week build time. May ship in black base coat.